|
新手上路
- 帖子
- 11
- 积分
- 16
- 注册时间
- 2005-8-18
|
1#
大 中
小 发表于 2005-10-23 00:56 只看该作者
我的三星康保，总出“电源校准错误”
一下是保存得log文件 引用:下面引用log文件的内容：
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File ';C:\Program Files\Ahead\nero\Wnaspi32.dll';: Ver=2.0.1.68, size=160016 bytes, created 2004-7-22 16:33:44
Nero版本： 6.3.1.20 (Nero Express)
刻录机： <TSSTcorp CDW/DVD TS-H492C>版本: CM01 - HA 1 TA 0 - 6.3.1.20
适配卡驱动程序： <atapi> HA 1
Drive buffer : 1536kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Generic DVD-ROM >版本: 1.0 - HA 2 TA 0 - 6.3.1.20
适配卡驱动程序： <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDW/DVD TS-H492C atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CDW/DVD TS-H492 I: CDRom0
Generic DVD-ROM H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 617MB (632060kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.10.2005
CD-ROM (ISO)
16:41:26#1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
16:41:26#2 Phase 89 File dlgbrnst.cpp, Line 1855
超级链接已激活
16:41:26#3 Text 0 File Reader.cpp, Line 126
Reader running
16:41:26#4 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CDW/DVD TS-H492C running
16:41:26#5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
16:41:26#6 Text 0 File Burncd.cpp, Line 3173
Turn on 轨道一次刻录, using CD-R/RW media
16:41:26#7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359841 ( 79:59.66)
Last address to be written: 340267 ( 75:38.67)
16:41:26#8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
16:41:26#9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: TSSTcorp CDW/DVD TS-H492C;
CDR code: 00 97 28 22; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: C0 00 80, 2: 61 1C 16 (LI 97:28.22), 3: 4F 3B 43 (LO 79:59.67)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
16:41:26#10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:41:26#11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 340268 (340268) = #340268/75:36.68
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 340266 blocks [TSSTcorp CDW/DVD TS-H492C]
--------------------------------------------------------------
16:41:26#12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CDW/DVD TS-H492C] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 697176064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
340268 | lead-out | 1 | 0x00 | 0x41
16:41:26#13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 340268 -> 340266.
16:41:26#14 Phase 24 File dlgbrnst.cpp, Line 1855
文件暂存过程开始
16:41:27#15 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
16:41:27#16 Phase 25 File dlgbrnst.cpp, Line 1855
文件暂存过程完成
16:41:27#17 Phase 36 File dlgbrnst.cpp, Line 1855
以16x (2,400 KB/s)的速度开始刻录
16:41:27#18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:41:27#19 Text 0 File Mmc.cpp, Line 20531
Set BUFE: Super Link -> ON
16:41:53#20 SCSI -1106 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0DA60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
16:41:53#21 CDR -1106 File Writer.cpp, Line 304
电源校准错误
16:41:53#22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
16:41:53#23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
16:41:55#24 CDR -201 File WriterStatus.cpp, Line 196
写入状态无效
TSSTcorp CDW/DVD TS-H492C\H1 T0
16:41:55#25 TRANSFER -18 File WriterStatus.cpp, Line 196
无法执行结束轨道
16:41:55#26 Text 0 File Mmc.cpp, Line 15356
<TSSTcorpCDW/DVD TS-H492C> start Close Session
16:41:55#27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
16:41:55#28 Phase 38 File dlgbrnst.cpp, Line 1855
以16x (2,400 KB/s)的速度刻录失败
Existing drivers:
File ';Drivers\CDR4_2K.SYS';: Ver=5.3.2.31, size=58000 bytes, created 2005-3-5 15:09:40
File ';Drivers\CDRALW2K.SYS';: Ver=5.3.2.31, size=23420 bytes, created 2005-3-5 15:09:40
File ';Drivers\atapi.sys';: Ver=5.00.2195.6699, size=86672 bytes, created 2003-6-19 12:05:04 (Adapter driver for rec)
File ';Drivers\d347prt.sys';: Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004-8-22 16:31:48 (Adapter driver for
src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [color=#FF6347]同一批光盘有得可以，有得光盘就出这个问题，而且不可以得很多。
那位大侠如果知道解决办法请不吝赐教，小弟不胜感激～～～
|
