请各位帮我诊断诊断
我买的是台电的白银战士DVD刻入机，刻速最高16X。光盘用的是三菱的，最高速也是16。原来刻了许多这种盘，都是好的，且很顺利。
可最近刻盘总是出现电源校准错误的问题。。。原来我就是用的4X刻的。。现在4X，8X，12X都试了，都是这个问题。我的机子配置是AMD2400+，512M内存，主版华硕A7N8X。
刻入机的错误报告是这样的：
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004-7-22 17:33:44
Nero版本： 6.3.1.25 (Nero Express)
刻录机： <DVDRW IDE 16X> 版本: A07M - HA 1 TA 0 - 6.3.1.25
适配卡驱动程序： <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <AXV CD/DVD-ROM >版本: 2.2a - HA 2 TA 0 - 6.3.1.25
适配卡驱动程序： <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE 16X G: CDRom0
AXV CD/DVD-ROM H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 17MB (17572kB)
Memory in use : 96 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.6.2006
ISO编辑
14:29:47 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
14:29:47 #2 Text 0 File Reader.cpp, Line 126
Reader running
14:29:47 #3 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running
14:29:47 #4 ISO9660GEN -11 ***eniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
14:29:47 #5 Text 0 File Burncd.cpp, Line 3152
Turn on 光盘一次刻录, using DVD media
14:29:47 #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2085055 (463:20.55, 4072MB)
14:29:47 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
14:29:47 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
14:29:47 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:29:47 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2085056 (2085056) = #2085056/463:20.56
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2085056 blocks [DVDRW IDE 16X ]
--------------------------------------------------------------
14:29:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4270194688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2085056 | lead-out | 1 | 0x00 | 0x41
14:29:47 #12 Phase 24 File dlgbrnst.cpp, Line 1855
文件暂存过程开始
14:29:48 #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
14:29:48 #14 Phase 25 File dlgbrnst.cpp, Line 1855
文件暂存过程完成
14:29:48 #15 Phase 36 File dlgbrnst.cpp, Line 1855
以8x (11,080 KB/s)的速度开始刻录
14:29:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
14:29:48 #17 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 6:31,345 (391345ms) -> OK
14:29:48 #18 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
14:29:48 #19 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Super Link -> ON
14:29:48 #20 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
14:29:48 #21 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
14:30:03 #22 SCSI -1106 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0AB10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
14:30:03 #23 CDR -1106 File Writer.cpp, Line 304
电源校准错误
14:30:03 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:30:05 #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
14:30:05 #26 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was -1
14:30:05 #27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
14:30:05 #28 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
14:30:05 #29 Phase 38 File dlgbrnst.cpp, Line 1855
以8x (11,080 KB/s)的速度刻录失败
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2005-12-5 13:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 2004-8-3 22:59:44 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004-4-30 9:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
不知道这个问题怎么解决，望赐教。
